HPE Servers
507284-001
300GB SAS hard disk drive - 6Gb/sec transfer rate, 10,000 RPM, 2.5-inch small form factor (SFF)
HPE and Aruba · HPE Servers
P19720-B21
HPE DL380 Gen10 8SFF NC CTO Svr S-ERVER
New Factory Sealed12 Months Warranty
Serial List Before ShipmentWorldwide Delivery
- Part Number
- P19720-B21
- Brand
- HPE and Aruba
- Category
- HPE Servers
- Lead Time
- Confirmed in writing at quotation
Product Overview
P19720-B21 Overview
HPE DL380 Gen10 8SFF NC CTO Svr S-ERVER
Key Benefits
What Owning It Changes
- A node that racks and boots because caddies rails and controllers came in the same consignment
- Spares held against the same part number so a failed drive does not become a project
- Written confirmation of the exact configuration before anything is packed
- Serial lists that let the end user register support in their own name
Problems It Solves
Pain Points It Removes
- Drive caddies controllers and rail kits quoted separately which leaves the rack build incomplete
- Spare parts for older generations disappearing from the channel just as they are needed
- Configurations arriving different from the quote because the part number was interpreted loosely
- No serial traceability which blocks registration of the support contract
Who It Is For
Who Benefits Most from P19720-B21
Data Centre Teams
Adding compute in defined increments rather than committing to a full refresh
System Integrators
Building virtualisation and backup platforms to a fixed customer specification
Hosting Providers
Standardising a node build that can be reordered for years
Enterprise IT Teams
Replacing servers that have fallen out of vendor support
Specifications
Supply Specification
| Part Number | P19720-B21 |
|---|---|
| Brand | HPE and Aruba |
| Category | HPE Servers |
| Product Condition | New factory sealed unless quoted otherwise |
| Configuration | Confirmed in writing against the vendor part number before shipment |
| Accessories | Rail kits caddies and controllers quoted with the chassis |
| Warranty | 12 months replacement plus optional vendor support contract |
| Packaging | Original vendor carton with export grade outer |
| Country of Origin | As printed on the vendor label |
Full electrical port and throughput specifications are issued with the quotation against the current vendor datasheet revision
Application Scenarios
Where It Is Deployed
Manufacturing And Quality Control
How This Unit Reaches You
-
01
Configuration Check
Part number decoded and confirmed line by line against what the project needs
-
02
Sourcing
Allocated from stock or ordered with a written lead time
-
03
Inbound Check
Seal photographed serial recorded and validated against the vendor database
-
04
Bench Test
Powered up firmware level reported and inventory captured where the order calls for it
-
05
Export Packing
Original carton inside an export grade outer with palletisation on volume orders
-
06
Documentation
Serial list invoice packing list and certificate pack released with tracking
ISO 9001
Quality management system covering sourcing inspection and despatch
ISO 14001
Environmental management across packaging and waste handling
CE
Conformity marking as applicable to the equipment supplied
FCC
Compliance marking as applicable to the equipment supplied
RoHS
Restriction of hazardous substances as declared by the manufacturer
Export Compliance
Screening against destination and end use restrictions before despatch
Comparison
Compared with Other Models in This Category
| P19720-B21 | 507284-001 | 581311-001 | 605835-B21 |
|---|---|---|---|
| HPE Servers | HPE Servers | HPE Servers | HPE Servers |
| New factory sealed | New factory sealed | New factory sealed | New factory sealed |
| 12 months replacement | 12 months replacement | 12 months replacement | 12 months replacement |
| Serial list before shipment | Serial list before shipment | Serial list before shipment | Serial list before shipment |
Detailed port power and throughput comparison is supplied with the quotation because the right choice depends on the uplink and power budget at your site
Use Guide
Deployment Guide for P19720-B21
-
1
Confirm the Part Number
Check the full part number including any suffix that sets the software tier or power option. A single trailing letter frequently changes what the unit can do.
-
2
Check Site Prerequisites
Confirm rack space power cabling and any uplink or accessory dependency before the order is placed rather than at install.
-
3
Unpack and Record
Photograph the seal before opening and record the serial against your asset register. Keep the carton until commissioning is complete.
-
4
Stage Before Deployment
Apply the base configuration and target software version on the bench so the change window is used for installation rather than setup.
-
5
Register Entitlement
If a support contract was purchased register it under the end user name so cases and downloads flow to the operating party.
-
6
Hold a Matched Spare
For any position where downtime carries real cost keep a spare against the same part number rather than a similar model.
Customisation
Options We Can Configure Before Despatch
Base Configuration Staging
Hostname management address and base config applied so the unit joins on rack
Software Version Alignment
Target software train applied so every unit in a wave matches
Per Site Kit Packing
Packed per site with accessories rather than per part number
Neutral Documentation
Packing lists and labels prepared in your name for direct delivery
Related Products
Other Models in HPE Servers
HPE Servers
581311-001
600GB hot-plug dual-port SAS hard disk drive - 6Gb/s transfer rate, 10,000 RPM, 2.5-inch small form factor (SFF) - For use with Ge
HPE Servers
605835-B21
HP 1TB 6G SAS 7.2K rpm SFF (2.5-inch) Dual Port Midline 1yr Warranty Hard Drive For Use with Gen7 or Earlier Models S-ERVER
HPE Servers
619291-B21
HP 1TB 6G SAS 7.2K rpm SFF (2.5-inch) Dual Port Midline 1yr Warranty Hard Drive For Use with Gen7 or Earlier Models S-ERVER
Related Reading
Cases and Guides Connected to This Product
Request Pricing for P19720-B21
Send quantity and destination and we will confirm price availability lead time and any accessories the installation needs
No forms No sign up Replies within one working day
FAQ
P19720-B21 Frequently Asked Questions
Is P19720-B21 New or Refurbished
Standard supply is new factory sealed in the original vendor carton. If a quotation offers another condition that is stated explicitly in writing before you commit.
Can I Get the Serial Number Before Payment Clears
Yes. Serials are issued before shipment so you can validate them against the vendor entitlement portal while the goods are still with us.
What Is the Lead Time for P19720-B21
Stock positions ship in two to four working days after cleared payment. Lines placed on order carry a factory lead time that is confirmed in writing at quotation.
Are Accessories Included
Accessories are quoted alongside the unit rather than assumed. Send the site requirement and the quotation will list everything the installation actually needs.
Do You Supply a Support Contract with It
Yes. Vendor support can be quoted with the hardware and registered under the end user name rather than under a reseller name.
What Warranty Does It Carry
Twelve months replacement warranty as standard. Faulty goods are returned under a return authorisation issued by us with the return address and instructions.
Can You Ship P19720-B21 to My Country
We ship worldwide by DHL FedEx UPS EMS or freight. You may also nominate your own courier account. Import duties are payable by the consignee.
Can You Drop Ship It to My Customer
Yes. Packing lists and outer labels can be prepared in your name so the consignment reaches the end customer directly.
What If It Arrives Damaged
Photograph the packaging before opening and contact us the same day. Transit insurance is available and recommended on higher value consignments.
Do You Supply Volume Quantities
Yes. Volume is handled against a rolling forecast so allocation is positioned ahead of demand rather than chased after the purchase order.